Part Number Hot Search : 
FM104 150M20X3 S2006VS3 AS7C3 CBAT754 SST39 00RL7 BSC09
Product Description
Full Text Search
 

To Download 2N5087 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 ON Semiconductort
Amplifier Transistor
PNP Silicon
2N5087
ON Semiconductor Preferred Device
MAXIMUM RATINGS
Rating Collector-Emitter Voltage Collector-Base Voltage Emitter-Base Voltage Collector Current -- Continuous Total Device Dissipation @ TA = 25C Derate above 25C Total Device Dissipation @ TC = 25C Derate above 25C Operating and Storage Junction Temperature Range Symbol VCEO VCBO VEBO IC PD PD TJ, Tstg Value 50 50 3.0 50 625 5.0 1.5 12 -55 to +150 Unit Vdc Vdc Vdc mAdc mW mW/C Watts mW/C C COLLECTOR 3 Symbol RqJA RqJC Max 200 83.3 Unit C/W C/W 1 EMITTER 2 BASE
1 2 3
CASE 29-11, STYLE 1 TO-92 (TO-226AA)
THERMAL CHARACTERISTICS
Characteristic Thermal Resistance, Junction to Ambient Thermal Resistance, Junction to Case
ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted)
Characteristic Symbol Min Max Unit
OFF CHARACTERISTICS
Collector-Emitter Breakdown Voltage(1) (IC = 1.0 mAdc, IB = 0) Collector-Base Breakdown Voltage (IC = 100 Adc, IE = 0) Collector Cutoff Current (VCB = 35 Vdc, IE = 0) Emitter Cutoff Current (VEB = 3.0 Vdc, IC = 0) 1. Pulse Test: Pulse Width 300 ms, Duty Cycle 2.0%. V(BR)CEO V(BR)CBO ICBO IEBO 50 50 -- -- -- -- 50 50 Vdc Vdc nAdc nAdc
Preferred devices are ON Semiconductor recommended choices for future use and best overall value.
1 November, 2001 - Rev. 1
Publication Order Number: 2N5087/D
2N5087
ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted) (Continued)
Characteristic Symbol Min Max Unit
ON CHARACTERISTICS
DC Current Gain (IC = 100 Adc, VCE = 5.0 Vdc) (IC = 1.0 mAdc, VCE = 5.0 Vdc) (IC = 10 mAdc, VCE = 5.0 Vdc)(1) Collector-Emitter Saturation Voltage (IC = 10 mAdc, IB = 1.0 mAdc) Base-Emitter On Voltage (IC = 1.0 mAdc, VCE = 5.0 Vdc) hFE 250 250 250 VCE(sat) VBE(on) -- -- 800 -- -- 0.3 0.85 Vdc Vdc --
SMALL-SIGNAL CHARACTERISTICS
Current-Gain -- Bandwidth Product (IC = 500 Adc, VCE = 5.0 Vdc, f = 20 MHz) Collector-Base Capacitance (VCB = 5.0 Vdc, IE = 0, f = 1.0 MHz) Small-Signal Current Gain (IC = 1.0 mAdc, VCE = 5.0 Vdc, f = 1.0 kHz) Noise Figure (IC = 20 Adc, VCE = 5.0 Vdc, RS = 1.0 k, f = 1.0 kHz) (IC = 100 Adc, VCE = 5.0 Vdc, RS = 3.0 k, f = 1.0 kHz) 1. Pulse Test: Pulse Width 300 ms, Duty Cycle 2.0%. fT Ccb hfe 250 NF -- -- 2.0 2.0 900 dB 40 -- -- 4.0 MHz pF --
TYPICAL NOISE CHARACTERISTICS
(VCE = -5.0 Vdc, TA = 25C)
10 7.0 en, NOISE VOLTAGE (nV) 5.0 IC = 10 A 30 A 100 A 1.0 mA 300 A 1.0 7.0 5.0 In, NOISE CURRENT (pA) 3.0 2.0 1.0 0.7 0.5 0.3 0.2 1.0 10 20 50 100 200 500 1.0 k f, FREQUENCY (Hz) 2.0 k 5.0 k 10 k 0.1 10 20 50 300 A 100 A 30 A 10 A 100 200 500 1.0 k 2.0 k f, FREQUENCY (Hz) 5.0 k 10 k IC = 1.0 mA
BANDWIDTH = 1.0 Hz RS 0
BANDWIDTH = 1.0 Hz RS
3.0 2.0
Figure 1. Noise Voltage
Figure 2. Noise Current
http://onsemi.com
2
2N5087
NOISE FIGURE CONTOURS
(VCE = -5.0 Vdc, TA = 25C)
1.0 M 500 k 200 k 100 k 50 k 20 k 10 k 5.0 k 2.0 k 1.0 k 500 200 100 0.5 dB 1.0 dB 2.0 dB 3.0 dB 5.0 dB 10 20 30 50 70 100 200 300 IC, COLLECTOR CURRENT (A) 500 700 1.0 k 1.0 M 500 k 200 k 100 k 50 k 20 k 10 k 5.0 k 2.0 k 1.0 k 500 200 100
RS , SOURCE RESISTANCE (OHMS)
RS , SOURCE RESISTANCE (OHMS)
BANDWIDTH = 1.0 Hz
BANDWIDTH = 1.0 Hz
0.5 dB 1.0 dB 2.0 dB 3.0 dB 5.0 dB 10 20 30 50 70 100 200 300 IC, COLLECTOR CURRENT (A) 500 700 1.0 k
Figure 3. Narrow Band, 100 Hz
Figure 4. Narrow Band, 1.0 kHz
RS , SOURCE RESISTANCE (OHMS)
1.0 M 500 k 200 k 100 k 50 k 20 k 10 k 5.0 k 2.0 k 1.0 k 500 200 100 0.5 dB
10 Hz to 15.7 kHz
Noise Figure is Defined as: NF + 20 log10 en2 ) 4KTRS ) In 2RS2 1 2 4KTRS en = Noise Voltage of the Transistor referred to the input. (Figure 3) In = Noise Current of the Transistor referred to the input. (Figure 4) K = Boltzman's Constant (1.38 x 10-23 j/K) T = Temperature of the Source Resistance (K) RS = Source Resistance (Ohms)
1.0 dB 2.0 dB 3.0 dB 5.0 dB 10 20 30 50 70 100 200 300 500 700 1.0 k IC, COLLECTOR CURRENT (A)
Figure 5. Wideband
http://onsemi.com
3
2N5087
TYPICAL STATIC CHARACTERISTICS
400
TJ = 125C 25C
h FE, DC CURRENT GAIN
200
-55C 100 80 60 40 0.003 0.005 VCE = 1.0 V VCE = 10 V 0.01 0.02 0.03 0.05 0.07 0.1 0.2 0.3 0.5 0.7 1.0 2.0 IC, COLLECTOR CURRENT (mA) 3.0 5.0 7.0 10 20 30 50 70 100
Figure 6. DC Current Gain
VCE , COLLECTOR-EMITTER VOLTAGE (VOLTS)
1.0 0.8 0.6 0.4 0.2 0 0.002 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1.0 2.0 IB, BASE CURRENT (mA) IC = 1.0 mA 10 mA 50 mA
TA = 25C IC, COLLECTOR CURRENT (mA)
100
TA = 25C PULSE WIDTH = 300 s 80 DUTY CYCLE 2.0% 300 A 60 40 20 0
IB = 400 A 350 A 250 A 200 A 150 A 100 A 50 A
100 mA
5.0 10
20
0
5.0 10 15 20 25 30 35 VCE, COLLECTOR-EMITTER VOLTAGE (VOLTS)
40
Figure 7. Collector Saturation Region
Figure 8. Collector Characteristics
1.2 V, VOLTAGE (VOLTS) 1.0 0.8 0.6 0.4 0.2 0 0.1
TJ = 25C
V, TEMPERATURE COEFFICIENTS (mV/C)
1.4
1.6 *APPLIES for IC/IB hFE/2 0.8 0 0.8 25C to 125C 1.6 2.4 0.1 qVB for VBE 0.2 -55C to 25C 50 100 *qVC for VCE(sat) 25C to 125C -55C to 25C
VBE(sat) @ IC/IB = 10 VBE(on) @ VCE = 1.0 V
VCE(sat) @ IC/IB = 10 0.2 0.5 1.0 2.0 5.0 10 20 IC, COLLECTOR CURRENT (mA) 50 100
0.5 1.0 2.0 5.0 10 20 IC, COLLECTOR CURRENT (mA)
Figure 9. "On" Voltages
Figure 10. Temperature Coefficients
http://onsemi.com
4
2N5087
TYPICAL DYNAMIC CHARACTERISTICS
500 300 200 100 70 50 30 20 10 7.0 5.0 1.0 td @ VBE(off) = 0.5 V tr 1000 700 500 300 200 t, TIME (ns) 100 70 50 30 20 50 70 100 10 -1.0 -2.0 -3.0 -5.0 -7.0 -10 -20 -30 IC, COLLECTOR CURRENT (mA) -50 -70 -100 ts
VCC = 3.0 V IC/IB = 10 TJ = 25C
VCC = -3.0 V IC/IB = 10 IB1 = IB2 TJ = 25C
t, TIME (ns)
tf
2.0
3.0 5.0 7.0 10 20 30 IC, COLLECTOR CURRENT (mA)
Figure 11. Turn-On Time
BANDWIDTH PRODUCT (MHz)
Figure 12. Turn-Off Time
500 TJ = 25C 300 200 VCE = 20 V 5.0 V C, CAPACITANCE (pF)
10 7.0 5.0 Cib TJ = 25C
3.0 2.0 Cob
f T, CURRENT-GAIN
100 70 50 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10 20 30 50
1.0 0.05
0.1
0.2
0.5
1.0
2.0
5.0
10
20
50
IC, COLLECTOR CURRENT (mA)
VR, REVERSE VOLTAGE (VOLTS)
Figure 13. Current-Gain -- Bandwidth Product
Figure 14. Capacitance
20 hie , INPUT IMPEDANCE (k ) 10 7.0 5.0 3.0 2.0 1.0 0.7 0.5 0.3 0.2 0.1 0.2
hoe, OUTPUT ADMITTANCE (m mhos)
VCE = -10 Vdc f = 1.0 kHz TA = 25C
200 100 70 50 30 20 10 7.0 5.0 3.0 2.0 0.1
VCE = 10 Vdc f = 1.0 kHz TA = 25C
0.5 1.0 2.0 5.0 10 20 IC, COLLECTOR CURRENT (mA)
50
100
0.2
0.5 1.0 2.0 5.0 10 20 IC, COLLECTOR CURRENT (mA)
50
100
Figure 15. Input Impedance
Figure 16. Output Admittance
http://onsemi.com
5
2N5087
r(t) TRANSIENT THERMAL RESISTANCE (NORMALIZED) 1.0 0.7 0.5 0.3 0.2 0.1 0.07 0.05 0.03 0.02 D = 0.5 0.2 0.1 0.05 0.02 0.01 SINGLE PULSE 0.05 0.1 0.2 0.5 1.0 2.0 5.0 10 20 50 t, TIME (ms) 100 200 FIGURE 19 P(pk) t1 t2 500 1.0 k 2.0 k 5.0 k 10 k 20 k 50 k 100 k
DUTY CYCLE, D = t1/t2 D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT t1 (SEE AN-569) ZqJA(t) = r(t) w RqJA TJ(pk) - TA = P(pk) ZqJA(t)
0.01 0.01 0.02
Figure 17. Thermal Response
400 IC, COLLECTOR CURRENT (mA) 200 100 60 40 20 10 6.0 4.0 2.0 TC = 25C TA = 25C TJ = 150C dc
1.0 ms 100 s dc
10 s
1.0 s
CURRENT LIMIT THERMAL LIMIT SECOND BREAKDOWN LIMIT 4.0 6.0 8.0 10 20 40 VCE, COLLECTOR-EMITTER VOLTAGE (VOLTS)
The safe operating area curves indicate IC-VCE limits of the transistor that must be observed for reliable operation. Collector load lines for specific circuits must fall below the limits indicated by the applicable curve. The data of Figure 18 is based upon TJ(pk) = 150C; TC or TA is variable depending upon conditions. Pulse curves are valid for duty cycles to 10% provided TJ(pk) 150C. TJ(pk) may be calculated from the data in Figure 17. At high case or ambient temperatures, thermal limitations will reduce the power than can be handled to values less than the limitations imposed by second breakdown.
DESIGN NOTE: USE OF THERMAL RESPONSE DATA
Figure 18. Active-Region Safe Operating Area
104 IC, COLLECTOR CURRENT (nA) 103 102 101 100 VCC = 30 V ICEO
ICBO AND ICEX @ VBE(off) = 3.0 V
10-1 10-2 -40
-20
0
+20 +40 +60 +80 +100 +120 +140 +160 TJ, JUNCTION TEMPERATURE (C)
A train of periodical power pulses can be represented by the model as shown in Figure 19. Using the model and the device thermal response the normalized effective transient thermal resistance of Figure 17 was calculated for various duty cycles. To find ZJA(t), multiply the value obtained from Figure 17 by the steady state value RJA. Example: The 2N5087 is dissipating 2.0 watts peak under the following conditions: t1 = 1.0 ms, t2 = 5.0 ms (D = 0.2) Using Figure 17 at a pulse width of 1.0 ms and D = 0.2, the reading of r(t) is 0.22. The peak rise in junction temperature is therefore T = r(t) x P(pk) x RJA = 0.22 x 2.0 x 200 = 88C. For more information, see ON Semiconductor Application Note AN569/D, available from the Literature Distribution Center or on our website at www.onsemi.com.
Figure 19. Typical Collector Leakage Current
http://onsemi.com
6
2N5087
PACKAGE DIMENSIONS TO-92 (TO-226) CASE 29-11 ISSUE AL
A R P L
SEATING PLANE
B
NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. INCHES MIN MAX 0.175 0.205 0.170 0.210 0.125 0.165 0.016 0.021 0.045 0.055 0.095 0.105 0.015 0.020 0.500 --0.250 --0.080 0.105 --0.100 0.115 --0.135 --MILLIMETERS MIN MAX 4.45 5.20 4.32 5.33 3.18 4.19 0.407 0.533 1.15 1.39 2.42 2.66 0.39 0.50 12.70 --6.35 --2.04 2.66 --2.54 2.93 --3.43 ---
K
XX G H V
1
D J C SECTION X-X N N
STYLE 1: PIN 1. EMITTER 2. BASE 3. COLLECTOR
DIM A B C D G H J K L N P R V
http://onsemi.com
7
2N5087
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.
PUBLICATION ORDERING INFORMATION
Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: ONlit@hibbertco.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada JAPAN: ON Semiconductor, Japan Customer Focus Center 4-32-1 Nishi-Gotanda, Shinagawa-ku, Tokyo, Japan 141-0031 Phone: 81-3-5740-2700 Email: r14525@onsemi.com ON Semiconductor Website: http://onsemi.com For additional information, please contact your local Sales Representative.
http://onsemi.com
8
2N5087/D


▲Up To Search▲   

 
Price & Availability of 2N5087

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X